Henkel Ltd, Epoxy in the mix

IPE Ireland

www.ipeireland.com


	What next? Request further Information visit web site Send to friend Henkel Ltd company's profile

Click here for the latest compressed air news !

Epoxy in the mix
August 1st 2009

Loctite's Hysol 3430 two part epoxy adhesive is now available in 50ml, 200ml and 400ml dual cartridge packs. The packaging uses a bi-mixer nozzle so the adhesive is automatically mixed at the point of application.

Loctite 3430 is an ultra clear, general purpose, toughened epoxy that has a fixture time of around 12min, a temperature range of -55 to +100°C and has good water resistance. The gap filling capability makes this an effective adhesive for rough and poorly fitting surfaces involving metal, ceramics, rigid plastics or wood.

More articles from Henkel Ltd:

Approved for water (1st March 2011)

Loctite 2400 and Loctite 2700 threadlocking adhesives from Henkel have been granted WRAS (Water Regulations Advisory Scheme) approval, allowing them to be used with potable water. Demonstrating that the products do not

From Plant process control

Clearly bonding (1st March 2011)

Loctite V5004, from Henkel, is a toughened, structural two-part acrylic adhesive that, when cured, is virtually transparent.

From Plant process control

Reading matter (1st October 2010)

Bob Goss, a senior technology specialist at Henkel, maker of Loctite brand products, has written a 180-page book called Practical Guide to Adhesive Bonding of Small Engineering Plastic and Rubber Components.

From Plant process control

Powerful solution to wear (1st October 2010)

To provide protection against wear in its stainless steel

From Plant process control

Protection for welding (1st August 2010)

Ceramishield is the ceramic protective coating for welding processes from Henkel. This dry film effectively protects welding equipment against metal spatter for durations of up to eight hours without the need to reappl

From Production engineering

New bactericide-free cutting fluids (1st August 2010)

Henkel has developed two water miscible, bactericide-free cutting fluids that are said to reduce health risks to employees, be easy to use and implement prospective EU Biocide Regulations.

From Production engineering

Weir wear repair (1st May 2010)

When it came to repairing Parteen weir hydroelectric power station, Loctite's Nordbak products were able not only to do the job but to provide high wear resistance for the future

From Plant process control

Two-part silicone (1st May 2010)

Loctite 5612 from Henkel is a new two-part, silicone adhesive designed for bonding glass, metals, ceramics, most plastics and elastomers where temperatures up to 220°C continuous or transient peaks of 300°C are involved

From Plant process control

Adhesive at the double (13th April 2010)

Loctite's Double Bubble is a new general purpose, single use, five minute two part epoxy resin adhesive suitable for maintenance applications that demand fast setting.

From Efficient Maintenance

Better grades (1st October 2009)

To facilitate use on a wider selection of substrates, Henkel has improved the formulations of two of its most popular threadlocking adhesives.

From Plant process control

Taking the hiss out of factories (1st October 2009)

Escaping compressed air is easily remedied.Colin Chapman of Henkel,maker of Loctite products,explains how threadsealers work under pressure to save this unnecessary expense

From Plant process control

Adhesives on the right track (1st August 2009)

Irish Rail has switched to Loctite for many of its adhesive tasks

From Plant process control

Service guide (1st August 2009)

Henkel, manufacturer of Loctite and Teroson products, has produced a comprehensive guide for professionals who service decanter centrifuges.

From Plant process control

Screen test (1st May 2009)

As a result of trials to prove that it was

From Plant process control

Cools corrosion (23rd March 2009)

Newark Electric Motors specialises in the supply, maintenance and repair of electric motors, gearboxes and pumps. The company relies on Loctite products and finds Freeze and Release particularly useful when dealing with corroded parts...

From Newsletters

Cools corrosion (1st March 2009)

Newark Electric Motors specialises in the supply, maintenance and repair of electric motors, gearboxes and pumps. The company relies on Loctite products and finds Freeze and Release particularly useful when dealing with

From Energy management

Make the right choice (1st March 2009)

Adhesives that cure quickly on exposure to light are now used extensively across a wide range of industries. To help existing and potential users understand the benefits and to make the right choices from its Loctite br

From Plant process control